D25M Ti

Top binned CREE XP-G S2 LED

The D25 Clicky Ti limited edition tributes to the finest master craftsmanship and the gorgeous titanium material.

The unique beauty of Titanium

Titanium has the highest strength-to-weight ratio of any metal and superb corrosion resistance, making it ideal for the material choice for our limited edition pocket flashlights.

The D25 clicky Ti is machined from titanium rod with CNC and hand polished to mirror-like finish. Order your personal copy now from your EAGTAC dealer before they are gone.

Best LED driver available

D25 clicky Ti series is the first to use the A400RC II driver and A950RC II driver. Both feature high efficiency, clicky and twist head operation, programmable 0.5 lumen moonlight mode, optional mode memory (D25C only), added auxiliary modes (i.e. disorientated strobe, fast SOS), and single li-ion compatibility.

Both limited Ti edition include a rigid holster w/retention device!

CREE XM-L2 U2 LED

We are putting the highest and latest bin available LED into the D25 clicky Ti for maximum brightness. XM-L2 led gives a relatively flood beam in the D25 reflector but higher output. If you are looking for a more concentrated beam, choose the CREE XP-G S2 Ti version. We also offer XM-L2 T6 LED in neutral white favor.

What's special?

  • Titanium built
  • Polished down to mirror finish
  • Pure copper LED heatsink
  • New A400RC II and A950RC II circuit
  • Programmable last mode memory (D25C) and moonlight settings
  • Pre-select output before turning on
  • Glow-in-the-dark Switch boot (Super bright!)

EAGTAC D25C Clicky Ti  Download HD pics | std pics


Powerful ultra-compact single CR123A flashlight. Must have for flashlight lovers and collectors. Uses CREE XM-L2 U2 or XP-G S2 LED.

  • 1/29/260/397 LED lumen (XM-L2 U2)
  • 0.5/22/182/277 O.T.F. lumen
  • Runtime: 0.9/1.6/10/150+ hours
  • Runs on RCR123A li-ion (direct drive*) Battery fitment
  • Twist head for group output, clicky switch for on/off and modes

Operations: (Basic) Press on the switch button until it clicks to switch on. Press the switch again for off. Access output groups 1 & 2 by tighten or loosen the head. Slightly press the switch to switch between different outputs. (Advance) 1) Moonlight output - dim or increase the entire output range of the group 1 output. Toggle this setting starting with head loosens, turn on the light, and then repeat tight and loose for three times. 2) Mode memory - remebers the last output in group 1. To toggle this setting, with head tighten, turn on the light, and repeat loose and tight for three times. See D25C clicky for detail specifications.

EAGTAC D25A Clicky Ti  Download HD pics | std pics


Powerful ultra slim single AA flashlight. Great for daily users. Uses CREE XM-L2 U2, XP-G S2, or XM-L2 T6 N.W. LED.

  • 1/10/107/176 LED lumen (XM-L2 U2)
  • 0.5/8/75/122 lumen
  • Runtime: 1.3/2.5/20/150+ hours
  • Twist head for group output, clicky switch for on/off and modes
  • Runs on 14500 li-ion (direct drive*) Battery fitment

Operations: (Basic) Press on the switch button until it clicks to switch on. Press the switch again for off. Access output groups 1 & 2 by tighten or loosen the head. Slightly press the switch to switch between different outputs. (Advance) 1) Moonlight output - dim or increase the entire output range of the group 1 output. Toggle this setting starting with head loosens, turn on the light, and then repeat tight and loose for three times. See D25A clicky for detail specifications.









* Using 4.2V li-ion direct drives the LED and yields maximum output at the expense of extensive heat generated from the LED. Limit each usage to less than five minutes (or less than one minute each with freshly charged li-ion for the first couple times). Active cooling (blowing cool air toward the light) or passive cooling (holding the light in your hand) helps preventing excessive heat built at the LED. Turn off the light to allow it to cool down if you find the flashlight too hot to hold. Do not leave the light running unattended with li-ion. Expect 500-750 LED lumen output from XM-L2 LED and 400-550 LED lumen from XP-G LED in direct driven mode.