GX30L2-R MKII SST70

How to use?

Basic operations:

• Turn on the light at TURBO output by double pressing the BLACK button switch.
• Turn on the light at HIGH (programmable) output by pressing the BLACK button switch.
• Turn on the light at LOW (programmable) output by pressing the WHITE button switch.
• To turn off the light, press and release the BLACK button switch.

Change brightness:

• To switch between different brightness levels, press the WHITE button switch.
• To enter hidden auxiliary levels, cycle through at least three cycle of regular output with the WHITE button switch.

Programming:

• To program the startup output level for the WHITE (BLACK) switch, switch to the desired output level, press and hold the WHITE button for three (six) seconds until the side LED blinks.

Advanced operations:

• For momentary on/off – press and hold the BLACK button switch. Release the switch and return to previous state.
• For instant Strobe output – double press and hold the BLACK button switch. Release the switch and return to previous state.
• For instant TURBO output – double press the BLACK button switch.

Lock-out:

• With flashlight off, press and hold the WHITE switch for three seconds to lock or unlock the flashlight.
• With flashlight locked, press the WHITE switch ten times to toggle side locator blink.

Charging:

• Remove the waterproof silicon cap and insert the charging power plug to charge.
• Blue side LED indicates the battery is being charged. It reports charging percentage by blinking.