D25A Clicky MKII

  • 405 LED lumen power by CREE XM-L2 U4 LED
  • Five brightness levels twisty head
  • Reversed clicky on/off tailcap switch
  • Uses protected 1*AA li-ion battery
  • 76 yards / 69meters maximum beam distance
  • Up to 1hrs on MAX output, 150hrs on low output
Compare
Category:

Description

Additional information

Performance
LED

CREE XM-L2 U4 (405lm)

Max output

405 LED lumen /286 ANSI lumen

Center lux @ 1 meter

1200 lux

Beam distance

76 yards / 69 meters

Output levels

405/232/16/2 LED lumen /286/167/11/2 ANSI lumen

Runtime

1/2.2/35/150+ hours

Battery
Battery Type

14500*1 | AA*1

Battery included

Built-in rechargeable

Operating voltage

0.8V – 1.7V

Battery requirement

Control
Control Type

Hidden auxiliary outputs

Strobe(Var)/Flash(Hi)/S.O.S.(Fast)/Beacon/Flash(Lo)

Dimensions
Body Diameter

0.65 inches (17 mm)

Head Diameter

0.7 inches (17.7 mm)

Length

3.4 inches (87 mm)

Weight w/ battery

0.85 ounces (24 grams)

Constructions
Flashlight Body Material

Lens

Reflector

Very light textured aluminum reflector

Waterproof

IPX-8

Optional LED1
LED (1)

CREE XP-L HI V3 (353lm)

Max output (1)

353 LED lumen /260 ANSI lumen

Center lux @ 1 meter (1)

2,050 lux

Beam distance (1)

99 yards / 91 meters

Output levels (1)

353/199/15/2 LED lumen /260/145/11/2 ANSI lumen

Runtime (1)

1/2.2/35/150+ hours

Optional LED2
LED (2)

Nichia 219C CRI-92 4000K D240 (275lm)

Max output (2)

275 LED lumen / 195 ANSI lumen

Center lux @ 1 meter (2)

1250 lux

Beam distance (2)

77 yards / 71 meters

Output levels (2)

275/149/13/2 LED lumen / 195/109/9/2 ANSI lumen

Runtime (2)

1/2.2/35/150+ hours

Optional LED3
LED (3)

CREE XP-G2 S3 (340lm)

Max output (3)

340 LED lumen / 240 ANSI lumen

Center lux @ 1 meter (3)

Beam distance (3)

Output levels (3)

340/199/14/2 LED lumen / 240/143/10/2 ANSI lumen

Runtime (3)

1-2.2/35/150+ hours

Picture gallery: Download
User manual: Download

 

How to use?

operations:

  • Basic – Press on the switch button until it clicks to turn on the flashlight. Press the switch again until it clicks to switch off the light.
  • Access output groups 1 & 2 – Tight the head to access group 2 output. Loose the head to access group 1 output.
  • Switch between output level – With the flashlight on, slightly press the switch and release (within 1s) to switch to the next output.
  • Toggle “Lower low” output levels – Toggle this setting starting with head loosen, turn on the light, wait for at least one second, and then repeat tight and loose for three times.
  • Toggle mode memory – remebers the last output in group 1. To toggle this setting, with head tighten, turn on the light, wait for at least one second, and repeat loose and tight for three times.

 

Includes

Included items: