GX30L2-R MKII SST70

  • 3100 LED lumen power by Luminus SST70 LB LED
  • Five brightness levels,instant strobe,programmable start-up
  • Reversed clicky on/off tailcap switch
  • Uses protected 2*18650 li-ion battery
  • 474 yards / 435 meters maximum beam distance
  • Up to 3.3hrs on MAX output, 200hrs on low output
Compare
Category:

Description

Additional information

Performance
LED

Luminus SST70 LB LED

Max output

3100 LED lumen / 2550 ANSI lumen

Center lux @ 1 meter

70,300 lux

Beam distance

474 yards / 435 meters

Output levels

3100-1100/1100/520/190/25 LED lumen /2550-1000/1000/450/170/23 ANSI lumen

Runtime

1-3.3/3.3/7.5/24/200+ hours

Battery
Battery Type

Battery Pack 7.4V 18650*2

Battery included

Yes

Built-in rechargeable

Operating voltage

5.4V – 8.4V

Battery requirement

Protection PCB (10A up)

Control
Control Type

Side switch

Hidden auxiliary outputs

Disorienting Strobe/Beacon (1.67Hz)/S.O.S.

Dimensions
Body Diameter

1 inches (25.4 mm)

Head Diameter

1.6 inches (39.5 mm)

Length

8.6 inches (220 mm)

Weight w/ battery

9.9 ounces (280 grams)

Constructions
Flashlight Body Material

HAIII hard anodization aerospace aluminum

Lens

Harden waterwhite glass lens with anti-reflective coating on both side

Reflector

Smooth aluminum reflector

Waterproof

IPX-8

Picture gallery: Download
User manual: Download

 

How to use?

Basic operations:

  • Turn on the light at MAX output by pressing the BLACK button switch.
  • Turn on the light at LOWEST (programmable) output by pressing the WHITE button switch
  • To turn off the light anytime, press and release the BLACK button switch.

 

Advanced operations:

  • To program the LOWEST startup output, switch to the desired output level and continuously pressing and holding the button for three seconds until the side LED flashes.
  • (Flashlight w/ programmable feature) In rare occasion user may experience the absence of lowest output level from a brand new purchase. If this is case, set the programmable startup level once will initialize the memory setting and will take care of this issue once and for all.
  • For MAX output momentary on, press and hold the BLACK button switch for immediate output.
  • To switch between different brightness levels, press and release the WHITE button switch when the flashligh is on.
  • To enter hidden auxiliary levels, cycle through at least two cycle of regular output.
  • For instant MAX output – at any output level, press and hold the BLACK button switch. Release the button to return to previous level.
  • For instant Strobe output – at any output level (even) off), double press and hold the BLACK button switch. Release the button to return to previous level (or off).

 

Charging:

  • Remove the waterproof silicon cap and insert the charging power plug to charge.
  • Blue side LED indicates the battery is being charged. It reports charging percentage by blinking.

Includes