S25V

  • 1200 LED lumen power by Osram KW CSLPM1.F1 Cool White LED
  • Three brightness levels,tailcap strobe,customized output
  • Reversed clicky on/off tailcap switch
  • Uses protected 21700 li-ion battery
  • 724 yards / 664meters maximum beam distance
  • Up to 3hrs on MAX output, 250hrs on low output
Compare
Category:

Description


Additional information

Performance
LED

Osram KW CSLPM1.F1 Cool White LED

Max output

1200 LED lumen / 960 ANSI lumen

Center lux @ 1 meter

110,300 lux

Beam distance

724 yards / 664 meters

Output levels

1200-910/640/450/270/55/20/7 LED lumen /960-745/525/370/220/46/17/6 ANSI lumen

Runtime

2-3/3.5/5.2/8/45/100/250 hours

Battery
Battery Type

21700*1

Battery included

Yes

Built-in rechargeable

Type-C USB

Operating voltage

2.7V – 4.2V

Battery requirement

Control
Control Type

Hidden auxiliary outputs

Disorienting strobe/Flash/S.O.S./Beacon

Dimensions
Body Diameter

1 inches (25.4 mm)

Head Diameter

1.9 inches (47 mm)

Length

6.9 inches (175.3 mm)

Weight w/ battery

8.0 ounces (225.6 grams)

Constructions
Flashlight Body Material

HAIII hard anodization aerospace aluminum

Lens

Harden waterwhite glass lens with anti-reflective coating on both side

Reflector

Smooth aluminum reflector

Waterproof

IPX-8

Optional LED1
LED (1)

CREE XHP70.2 P2 Cool White LED

Max output (1)

3200 LED lumen / 2600 ANSI lumen

Runtime (1)

0.8-1.8/200 hours

Optional LED2
LED (2)

CREE XHP70.2 N4 Neutral White LED

Max output (2)

2976 LED lumen / 2418 ANSI lumen

Runtime (2)

0.8-1.8/200 hours

Optional LED3
LED (3)

CREE XHP35 HI E2 Cool White LED

Max output (3)

2050 LED lumen / 1640 ANSI lumen

Runtime (3)

2.8-4.2/350 hours

Optional LED4
LED (4)

CREE XHP35 HI D4 Neutral White LED

Max output (4)

1905 LED lumen / 1525 ANSI lumen

Runtime (4)

2.8-4.2/350 hours

Picture gallery: Download
User manual: Download

 

How to use?

Basic operations:

  • Turn on the light by pressing the tailcap button until it clicks.
  • Twist the head to select between three output levels.
  • Pre-selected output level before turning on the light.
  • Cycle through auxiliary modes: tight the head (1st level), and loose the head (3rd level) and then tight the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loose the head to quit.

 

Advanced operations:

  • Choose one of the four levels as the default medium output: Switch to medium output and turn the flashlight on and off for 20 times to cycle through the next output setting.
  • Choose one of the four levels as the default low output: Switch to low output and turn the flashlight on and off for 20 times to cycle through the next output setting.
  • Tail strobe feature (off by default): With this enabled, you can access strobe output at the tailcap switch button . To toogle this function, switch to 1st level and turn the flashlight on and off 20 times. With the tailcap strobe setting enabled, a double press of the switch button will activate the strobe output.

 

Charging:

  • Remove the waterproof cover and insert the included type-c charging cable to charge the battery.
  • The signal LED located at the waterproof cover indicates the charging status. Signal LED shuts off when charging is completed at 100% (it will not shut off when charging limit is set to 80% i.e. switch at off position).
  • During charge, switch on the flashlight switch at the tailcap to charge to 100%. Leaving the switch in off position will only charge the battery to 80% (extend battery life cycle).
  • Time to fully charge a depleted 21700 5000mAh battery is 3-4 hours

Includes