M30LC2

1348 LED lumen powered by XM-L2 U4 LED
Twist head to choose level, pre-select any output level (4 levels) before turning on, seven hidden AUX outputs
Regular mode (3+1 brightness levels) or tactical mode (Two brightness levels + strobe)
Tactical forward clicky on/off tailcap switch; Tail strobe feature (ON/OFF selectable); Energy saving feature
Uses protected 1*18650 li-ion battery or 2*18650 / 3*CR123A / 4*CR123A with extender tube
562 yards / 514 meters maximum beam distance
Up to 1.8 hrs on MAX output, 200 hrs on low output

Category: M series

Description

Performance

Battery

Control

Control Type	–
Hidden auxiliary outputs	Strobe/Disorienting strobe/Flash(Hi)/S.O.S.(Fast)/S.O.S./Beacon/Flash(Lo)

Dimensions

Constructions

Flashlight Body Material	HAIII hard anodization aerospace aluminum
Lens	Harden waterwhite glass lens with anti-reflective coating on both side
Reflector	Smooth aluminum reflector
Waterproof	IPX-8

Optional LED1

Optional LED2

Optional LED3

Picture gallery: Download
User manual: Download

How to use?

Basic operations:

Turn on the light by pressing the tailcap button until it clicks.
Twist the head to select between three output levels.
To access the lowest 4th level, turn the head to 3rd level, then 2nd level, and then back to 3rd level within one second.
You can pre-selected output level before turning on the light.

Advanced operations:

Cycle through auxiliary modes: tight the head (1st level), and loose the head (3rd level) and then tight the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loose the head to quit.
Switching between regular mode and tactical mode (default): Switch to 2nd output level and turn the flashlight on and off for 20 times.
Tail strobe feature (off by default): With this enabled, you can access strobe output at the tailcap switch button . To enable (or disable) this function (disable from factory), switch to 1st level and turn the flashlight on and off 20 times (one second or less between each click). With the tailcap strobe setting enabled, a double press of the switch button (within one second) will activate the strobe output.
Energy saving feature (on by default): M30LC2 reduces output by 24% after 200 seconds at turbo mode. With this feature turned off, M30LC2 reduces output by 8% instead. To toggle this feature, twist the head to 3rd level and turn the flashlight on and off for 20 times. Once setting has been changed, LED will output 3 seconds at 100% (enable), or 1 second at 100% (disable).