G25C2 MKII

1351 LED lumen powered by XM-L2 U4 LED
Twist the head to instantly access between four levels output
Pre-select any output before turning on; Hidden AUX modes
Regular mode (4 brightness levels + 7 AUX modes) or Tactical mode (2 brightness levels, 2 storbes + 7 AUX modes)
Tactical forward clicky on/off tailcap switch; Tail strobe on / OFF
Energy saving feature
Uses protected 1*18650 li-ion battery or 2*18650 / 2*CR123A / 3*CR123A / 4*CR123A with extender tube
323 yards / 295 meters maximum beam distance
Up to 1.8 hrs on MAX output, 150 hrs on low output

Category: G series

Description

Performance

Battery

Control

Control Type	Tactical forward clicky tailcap switch
Hidden auxiliary outputs	Strobe/Disorienting strobe/Flash(Hi)/S.O.S.(Fast)/S.O.S./Beacon/Flash(Lo)

Dimensions

Constructions

Optional LED1

Optional LED2

Optional LED3

LED (3)	CREE XP-L HI V2 Neutral White LED
Max output (3)	1068 LED lumen / 933 ANSI lumen
Center lux @ 1 meter (3)	–
Beam distance (3)	–
Output levels (3)	1068/484/95/7.4 LED lumen / 933/431/82/6.5 ANSI lumen
Runtime (3)	1.8/3/18/150+ hours (1*18650)

Picture gallery: Download
User manual: Download

How to use?

Basic operations:

Advanced operations:

Cycle through auxiliary modes: Tighten the head (1st level), and loosen to 3rd (or 4th level) and then tighten the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loosen the head to quit.
Switching between regular mode and tactical mode (default): Switch to 2nd output level and turn the flashlight on and off for 20 times.
Tail strobe feature (off by default): With this enabled, you can access strobe output at the tailcap switch button . To enable (or disable) this function (disable from factory), switch to 1st level and turn the flashlight on and off 20 times (one second or less between each click). With the tailcap strobe setting enabled, a double press of the switch button (within one second) will activate the strobe output.
Energy saving feature (on by default): G25C2 reduces output by 24% after 200 seconds at turbo mode. With this feature turned off, G25C2 reduces output by 9% instead. To toggle this feature, twist the head to 4th level and turn the flashlight on and off for 20 times. Once setting has been changed, LED will output 3 seconds at 100% (enable), or 1 second at 100% (disable).