M30LC2 Pro

2000 LED lumen powered by XHP35 HD E4 LED
Twist head to choose level, pre-select any output level (4 levels) before turning on, seven hidden AUX outputs
Regular mode (3+1 brightness levels) or tactical mode (Two brightness levels + strobe)
Tactical forward clicky on/off tailcap switch; Tail strobe feature (ON/OFF selectable); Energy saving feature
Uses protected 1*18650 li-ion battery or 2*18650 / 3*CR123A / 4*CR123A with extender tube
420 yards / 385 meters maximum beam distance
Up to 1.3 hrs on MAX output, 200 hrs on low output

Category: M series

Description

Performance

Battery

Control

Control Type	–
Hidden auxiliary outputs	Disorienting strobe/Flash/ Beacon/S.O.S.

Dimensions

Constructions

Flashlight Body Material	HAIII hard anodization aerospace aluminum
Lens	Harden waterwhite glass lens with anti-reflective coating on both side
Reflector	Smooth aluminum reflector
Waterproof	IPX-8

Optional LED1

Optional LED2

LED (2)	CREE XHP35 HD E2 Neutral White LED
Max output (2)	1860 LED lumen / 1488 ANSI lumen
Center lux @ 1 meter (2)	–
Beam distance (2)	–
Output levels (2)	1860-1228/660/233/17 LED lumen / 1488-994/541/1930/14 ANSI lumen
Runtime (2)	1-1.3/2.8/10 or 200 hrs (1×18650 3500mAh)

Optional LED3

LED (3)	CREE XHP35 HI D4 Neutral White LED
Max output (3)	1739 LED lumen / 1302 ANSI lumen
Center lux @ 1 meter (3)	–
Beam distance (3)	–
Output levels (3)	1739-1144/614/209/14 LED lumen / 1302-915/498/172/11 ANSI lumen
Runtime (3)	1-1.3/2.8/10 or 200 hrs (1×18650 3500mAh)

Picture gallery: Download
User manual: Download

How to use?

Basic operations:

Turn on the light by pressing the tailcap button until it clicks.
Twist the head to select between three output levels.
Pre-selected output level before turning on the light.
Cycle through auxiliary modes: tight the head (1st level), and loose the head (3rd level) and then tight the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loose the head to quit.

Advanced operations:

Programing the third level output level: Switch to third level and turn on and off for 20 times.
Switching between regular mode and tactical mode: Switch to 2nd output level and turn the flashlight on and off for 20 times.
Tail strobe feature (off by default): With this enabled, you can access strobe output at the tailcap switch button . To toogle this function, switch to 1st level and turn the flashlight on and off 20 times. With the tailcap strobe setting enabled, a double press of the switch button will activate the strobe output.