T25C2 Pro MKII

2100 LED lumen powered by XHP35 HD E4 LED
three brightness levels，tail-cap strobe feature
Start-up with any output, programmable medium and low brightness level
Replaceable LED dropin module: UV 365/395nm, IR 850/940nm, High CRI or any color LED
Forward clicky on/off tailcap switch
Uses protected 18650 li-ion battery
439 yards / 402 meters maximum beam distance
Up to 1.3 hrs on MAX output, 170 hrs on low output

Category: T series

Description

Performance

Battery

Control

Control Type	–
Hidden auxiliary outputs	Disorienting strobe/Flash/S.O.S./Beacon

Dimensions

Constructions

Flashlight Body Material	HAIII hard anodization aerospace aluminum
Lens	Harden waterwhite glass lens with anti-reflective coating on both side
Reflector	Smooth aluminum reflector
Waterproof	IPX-8

Optional LED1

Optional LED2

LED (2)	CREE XHP35 HD E2 Neutral White LED
Max output (2)	1953 LED lumen / 1581 ANSI lumen
Center lux @ 1 meter (2)	–
Beam distance (2)	–
Output levels (2)	1953-1311/930-651-372/93-47-17 LED lumen / 1581-1070/772-540-312/87-44-16 ANSI lumen
Runtime (2)	0.8-1.3/2-3-6/29-55-170 hours

Optional LED3

LED (3)	CREE XHP35 HI D4 Neutral White LED
Max output (3)	1814 LED lumen / 1470 ANSI lumen
Center lux @ 1 meter (3)	–
Beam distance (3)	–
Output levels (3)	1814-1218/884-605-344/83-42-5 LED lumen / 1470-1000/735-502-288/70-35-12 ANSI lumen
Runtime (3)	0.8-1.3/2-3-6/29-55-170 hours

Picture gallery: Download
User manual: Download

How to use?

Basic operations:

Turn on the light by pressing the tailcap button until it clicks.
Twist the head to select between three output levels.
Pre-selected output level before turning on the light.
Cycle through auxiliary modes: tight the head (1st level), and loose the head (3rd level) and then tight the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loose the head to quit.

Advanced operations:

Choose one of the four levels as the default medium output: Switch to medium output and turn the flashlight on and off for 20 times to cycle through the next output setting.
Choose one of the four levels as the default low output: Switch to low output and turn the flashlight on and off for 20 times to cycle through the next output setting.
Tail strobe feature (off by default): With this enabled, you can access strobe output at the tailcap switch button . To toogle this function, switch to 1st level and turn the flashlight on and off 20 times. With the tailcap strobe setting enabled, a double press of the switch button will activate the strobe output.