D25AAA II

  • 200 LED lumen powered by SST20 LED
  • Turn on at last brightness level (memory function enabled)
  • Always turn on at low output (memory function disabled)
  • Twist head to cycle between brightness levels
  • Four brightness levels + five hidden AUX modes
  • Strong magnet tailcap, stainless steel pocket clip
  • Uses 1*AAA battery
  • 50 yards / 45 meters maximum beam distance
  • Up to 0.8 hrs on MAX output, 10 hrs on low output
  • Supports 10440 li-ion dimming with 650 max lumen and 2.8v low voltage shutdown
Compare
Category:

Description

Additional information

Performance
LED

Luminus SST20 Cool White LED

Max output

200 LED lumen / 140 ANSI lumen

Center lux @ 1 meter

500 lux

Beam distance

50 yards / 45 meters

Output levels

200/90/30/10 LED lumen / 140/67/22/8 ANSI Lumen

Runtime

10/7/2.5/0.8 hours
Battery
Battery Type

AAA*1

Battery included

–

Built-in rechargeable

–

Operating voltage

0.8V – 4.2V

Battery requirement

–
Control
Control Type

Twisty
Dimensions
Body Diameter

0.5 inches (13 mm)

Head Diameter

0.55 inches (14 mm)

Length

2.7 inches (70 mm)

Weight w/ battery

0.4 ounces (13 grams)
Constructions
Flashlight Body Material

–

Lens

–

Reflector

Optical grade acrylic TIR optics

Waterproof

IPX-8
Optional LED1
LED (1)

Nichia 219B SW45 D220 LED (CRI 92) LED

Max output (1)

115 LED lumen /68 ANSI lumen

Center lux @ 1 meter (1)

250 lux

Beam distance (1)

35 yards / 32 meters

Output levels (1)

–

Runtime (1)

–

Battery selection:

  • High quality rechargeable low-discharge 1.2V NiMH AAA battery (or 1.7V lithium) is recommended for extended runtime and output
  • High quality alkaline AAA battery may also be used for reduced runtime compared to NiMH. Always take out battery before storage as alkaline battery may leak. Do not use any other chemistry type non-rechargeable AAA battery.
  • Rechargeable 10440 li-ion battery with button top may also be used for increased output. However, use or carry this type of battery at your own risk. EAGTAC is not responsible for any damage or injury resulted from using li-ion battery in this flashlight.

 

Basic operations:

  • Turn on the light by tightening the head
  • Turn off the flashlight by loosing the head
  • Loose and tight the head within one second to cycle between brightness levels
  • Cycle two set of regular brightness levels to enter hidden AUX levels

 

Advanced operations:

  • Cycle three sets of complete hidden AUX levels to toggle memory setting once

 

Others:

  • 0.5V output dim and shutdown (AAA)
  • 3.0V output dim and shutdown (li-ion) (Do not solely rely on built-in li-ion low voltage protection, as circuit will still consume 1ma current after shutdown and battery voltage will go down slowly if left connected. Hence, user should charge li-ion before it reaches low voltage protection. Discard li-ion battery that is deeply discharge below 2.7V.)

Related products